Starter motor question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nip
    S2Forum Extremist
    • Apr 2006
    • 1786
    • Home: United Kingdom Current: Abu Dhabi

    #1

    Starter motor question

    Any ideas?, on the starter there is a main pos also 1 spade connector , but problem is which spade does it go on top or bottom when starter is bolted to the block? , not got a pic to explain properly
    cheers nip
  • mcandmar
    S2Forum Zealot
    • Apr 2004
    • 5118
    • Country: Ireland

    #2
    Fairly sure its the top one, when viewed from under the car.
    91CQ20v - Gone to a new home
    93UR-S4 - The Magic Carpet
    94S2Bus - The Emerald Express

    Comment

    • UrS4boy
      S2Forum Obsessed
      • Feb 2006
      • 11859
      • Country: Canada

      #3
      Originally posted by nip
      Any ideas?, on the starter there is a main pos also 1 spade connector , but problem is which spade does it go on top or bottom when starter is bolted to the block? , not got a pic to explain properly cheers nip
      This is for an AAN but it should work for you:

      RS2'd 93 UrS4 5 spd sedan
      94 UrS4 V8 6 spd manual avant

      Comment

      • Kieron20V
        S2Forum Extremist
        • Mar 2008
        • 1505
        • Home: England Current: United Kingdom

        #4
        The other one is marked 15, not sure if its top or bottom, but if you can see it then you sould be able to read te markings. Start solenoid feed is "50" i think.
        1994 URS4 Avant RS2+

        Comment

        • Pirvu Eugen
          S2Forum Extremist
          • Apr 2007
          • 1978
          • Country: Romania

          #5
          Not sure about the markings...but as Mcandmar said...at all i have removed and fitted..the top one is the correct.

          Comment

          • nip
            S2Forum Extremist
            • Apr 2006
            • 1786
            • Home: United Kingdom Current: Abu Dhabi

            #6
            Cheers lads brilliant

            Comment

            Working...