AAN -- to reverse lights??

[tajgreidotu]

Looking to AAN wiring diagram, connetion to M16 M17 reverse light is hidden somewhere....

Do you know how is it connected??

[UrS4boy]

Not really sure what you question is. The reverse light harness connects to the reverse light switch on the transmission, as shown here:

[tajgreidotu]

Hi Urs4boy,

Im trying to connect my AAN loom into my cq(s2 3b), so following Paul´s ABY guide there should be a wire that comes from F4 to rear loom. But, In my conversion I skip that wire because scheme is incomplete.

As you can see in the picture above, in the ABY theres a wire coming from F4 to tf1, But in ABY scheme, there´s only sw/bl wire into F4 but no other.

At the end, I have tf1 in the car but dont have any wire coming from F4 to connect it in engin harness.

I hope I explained myself well, with my crappy english.....

PS: I used AAN schemes from quattroworld

[tajgreidotu]

I think I found the answer:

Reverse lights is T6b/4 (blue/red)

Need to check