Instrument cluster circuit board ?

[keepinthedreamalive]

Guys, as the thread might suggest, I'm after a bare circuit board for my ABY S2.
Story was that I had no dash panel lights on the left side of the speedo, bang on where the 30mph was. Easy enough I thought, change the bulb and hey presto - still no lighty up.....
2 hours later after complety stripping the cluster apart I've found that there is a crack on the board and tracing it back, supplies the side light illumination.
There is a number on the board reading 993 087 493 and is made by VDO.
If anyone has a board or an old cluster, please let me know. I'll also put a wanted in the classifed for good measure,
Chhers all

[johne]

I had exactly the same problem but solved it by soldering a wire link to bridge the crack.

I also changed to LEDs at the same time for the panel lights which I also soldered in but you have to put them in the right way round or they won't illuminate.

The board is narrow at the point the circuit cracks so it's likely that a replacement will do the same so I'd recommend repairing yours.

John