Help on onboard computer fixing!

[Jaymz]

My s2's computer haven't shown anything when i have owned the car and my friend is now looking at the pcb.

He found couple of issues, but one resistor is so badly fried that it's not possible to read the values.

Help would be very appreciated. Even an picture of working pcb would be great!

Look at the pictures i attached.

[Nuvo]

I think that might be a fusible link/0 ohm resistor. You'll need to find the cause of the short circuit to repair the board.

[Jaymz]

I am not the man who is repairing this, just gathering information for my friend

He is an electronics engineer and does this job for living, but even he cant see what is burnt off the resistor.

There was some other issues he have fixed from this...

[Jaymz]

Member on audiclub Finland sent me this. So issue solved for now!

[Nuvo]

So it's evidently not a fusible link as I first thought then. I'd be interested to learn what other components failed on the board as it might help someone else who has the same failure in the future.