ABY fuse board 2x2 connectors

[Error404]

Anyone know if the mounting rail for the K & L terminals and 2x2 connectors is a separate part of the fuse board, that clips onto the fuse board surround on the ABY to attached these connections to?

This is the part I mean:


As far as i can tell the fuse board housing / mounting surround is the same as mine as I can;t find a different part number for the ABY fuse board, but I dont have the mounting rail for these connections on my CQ one. Can anyone have a look at theirs for me pretty please with sugar on top?

Thanks
Alex

[Sleeper_Avant]

You want the male or female bits mate?

or the fuseboard itself?

im scrapyard doggin a lot this week and know of a "few" B3/4`s arround me i could rape and pillage for you

p.s i have a propper Bosch 2x2 fly lead if you ever need one

[andy10v]

It appears to be part of the fusebox surround on my 3B.

I will get you pictures in a minute.

[andy10v]

[Error404]

Awesome, thanks guys.
Pics are really helpful Andy, thanks

Shaun, if you get the chance to slip one the same as Andy's pics out of a late B4 car into your tool box :shh:, I would happily exchange a few beer tokens for it. Its the fuse board surround, that bolts to the scuttle panel

[Sleeper_Avant]

i seem to recall my B4 Quattro saloon didnt have the same setup but memory and pics surpass me im afraid

[Sleeper_Avant]

cool, i will have a ferret about over the next few days fella

[Error404]

Ta mate

[spink]

I would seriously consider putting an obd socket inside the car Alex,you will soon get pissed off opening the bonnet/fusebox every time you want to vagcom the car(I do anyway)

**unless you are fitting one of those oem extension pieces that you can run inside the car**

[Sleeper_Avant]

i do have a propper Bosch one you can have if you want?

ir i can show/tell you how and where to pin the K/L wires into an OBD2 plug too

and it saves ****ing about as Mr.Spink sugests