hardwiring fuel pump

[nip]

hi all, anybody got any tips on how to do this please pic too lol

[Val]

What? Take a wire, put it around fuel pump and apply force.

[Audicted]

What? You mean "How to set your car on fire 101".

[nip]

Lol I meant how to hard wire the fuel pump relay

[Val]

Take out FP relay and plug in that position fog light relay. Turn on ignition.
Fast and no need for extra wires.

[martinws]

Are you meaning how to take a direct feed from the battery to bypass the thin original fuel pump wiring to stop volt drop?

If so, you need to use the existing wires to fire a relay and then run a cable from positive via a 30A fuse straight to the pump then run a negative feed via the relay to the pump. Make sure all connections are crimped or soldered properly and make sure the fuse holder is up to the task. I dont have many pictures that are of use to you from mine.

I found this online, it is pretty much right apart from dont need to slice into the original feed, you just take it off the original pump.

[nip]

Are you meaning how to take a direct feed from the battery to bypass the thin original fuel pump wiring to stop volt drop?

If so, you need to use the existing wires to fire a relay and then run a cable from positive via a 30A fuse straight to the pump then run a negative feed via the relay to the pump. Make sure all connections are crimped or soldered properly and make sure the fuse holder is up to the task. I dont have many pictures that are of use to you from mine.

I found this online, it is pretty much right apart from dont need to slice into the original feed, you just take it off the original pump.

yep mate that's what I need cheers

[Val]

"30" and "87" is drawn in wrong positions in above picture. Don't trust everything you see.

[S2Roo]

Has anyone got any pictures of this installed? I'm looking for ideas how to mount it all and keep it tidy/professional looking??

Thanks

[UrS4boy]

Two options to relay your UrS fuel pump to the battery

Has anyone got any pictures of this installed? I'm looking for ideas how to mount it all and keep it tidy/professional looking?? Thanks

Two options:
1. You can use myfuel pump relay DIY as a guide:http://forums.quattroworld.com/s4s6/msgs/24327.phtml, adapting it to the B3/B4 as needed




OR

2. just purchase and install 034's kit:

https://store.034motorsport.com/c4-f...relay-kit.html