Cruise control wiring.

[turbodriver63]

I'm fortunate enough to have a late tdi B4, so to install cruise control is relatively easy.
I've swaped the stalk for a CC unit today.
But I have to make up a short loom from the Stalk to the blue connector under the dash near the accelerator pedal.
Where could I get my hands on the matching male pin that clips into the blue connector?

[turbodriver63]

Bump ��

[turbodriver63]

image.jpg
I'm looking for the yellow section. Any help appreciated

[mdz]

It's from central locking wiring.

[shaun5]

It might take a few days but I might be able to help you send me a reminder pm if you hear nothing.

[_ShurikeN]

The yellow one also looks similar to a connector from aux temperature display wiring (yellow) or automatic transmission dash display (black). It is very likely that black 5-pin connector exists in any underdash harness (right behind tacho unit). You could use it.

[turbodriver63]

That's good to know.
Cheers guys.
@shaun5, I'll message you in a couple of days if i hear nothing. Cheers

[shaun5]

this is the wiring connector from the cruise kit ive just removed. I will see if any of the looms ive got have the connector.

[turbodriver63]

Cheers Shaun.
That would be great

[shaun5]

Do you still need the connector? I've git one if you do

[turbodriver63]

Do you still need the connector? I've git one if you do

Hi Shaun. Yeah mate if ya have one I'd still like it
Pm me with details if ya get a chance

[shaun5]

Here is the connector, as you can see one of the connectors is missing a wire (it was never there)