B4 Tdi wiring problem

[colm9944]

Hi, My ignition has given up the ghost and I'm trying to fit a push button start. Key turns and all lights are on and it's just the ignition that needs replacing but I'm just going to throw a button on it for now until I pick one up.

What two colour wires do I connect to the button? Any ideas?


Thanks a million

[bluequattro]

No ideas but I have ignition switches if you need them!

[Val]

There are 15/30/50/75 etc numbers on the other side.

Starter wire would be 50. Wire a button between 15 and 50.

[colm9944]

There are 15/30/50/75 etc numbers on the other side.

Starter wire would be 50. Wire a button between 15 and 50.

So connect a 50 to to something between 15 and 50 to the other pole?

Thanks Val

[colm9944]

No ideas but I have ignition switches if you need them!

I got one this evening earlier by chance in an autofactor but electrics wouldn't be a strong point of mine.... thanks anyway for the offer

[Val]

So connect a 50 to to something between 15 and 50 to the other pole?

No, connect a push button (push=on, release=off) between 50 and 15.