P/N for aux water pump wiring plug

[sidrick]

I've got half my engine bay out replacing the rad and PCV piping and noticed my aux pump just has spade connectors held on mainly by magic. Does anyone know the wiring plug P/N? I've spent ages with KATE and can't find it

[Error404]

Its a generic 2 pin female JPT connector - this is what you need as a full kit

http://www.ebay.co.uk/itm/Junior-Pow...item588c1ff24c

[sidrick]

Bought, thanks a lot

[Nuvo]

Alex, what crimp tool do you use specifically for JPT terminals?

[Error404]

I have this uninsulated crimp tool: http://www.polevolt.co.uk/acatalog/info_TT52.html

I need a new one really, he jaws are getting worn but I have made thousands of crimps with them now so they have lasted well - recommended

[Nuvo]

Thanks.

[UrS4boy]

...noticed my aux pump just has spade connectors held on mainly by magic. Does anyone know the wiring plug P/N? I've spent ages with KATE and can't find it

You need to get more down and dirty with Kate. She squirrels the harness info away in main group 9. Go there and ask about "harness" and then go to "harness for engine compartment". She should show you illustration 971-52. For an example ACOQ 1993, the one you want is item 13, PN 443906232, flat contact housing, 2 pin.

OR you could have used this engine bay harness graphic (for an AAN but it works part number-wise for ABYs and ADUs) that I created using info that I asked Kate about (and have posted here a few times)

[sidrick]

Top man