Drivers window issue number 495949393

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Sluttysmurf
    S2Forum Enthusiast
    • May 2014
    • 152
    • Country: England

    #1

    Drivers window issue number 495949393

    Right in waiting for a motor I bought off someone to turn up.


    But in the mens time is there anyway to over ride the window to get it up
    As it's stuck halfway down and I can't borrow my mates car any longer


    So need to get it at least up so I can still use my car


    Any help is welcomed,


    Cheers

    Martin
  • montyrs2
    S2Forum Maniac
    • May 2008
    • 522
    • Country: United Kingdom

    #2
    I've not taken a good look at my window reg but i'm assuming the motor is a 2 pin, so just put 12v across it and it will move, reverse polarity to go the other way.

    If you are waiting for a motor because yours doesn't move at all you will be able to remove the motor from the drum housing and move the window up then refit the motor to lock the drum back in place. Be very careful though as you don't want the drum to come out and wire to all undo. So if possible get some one to hold drum in housing whilst you move glass.

    Comment

    • Sluttysmurf
      S2Forum Enthusiast
      • May 2014
      • 152
      • Country: England

      #3
      Originally posted by montyrs2
      I've not taken a good look at my window reg but i'm assuming the motor is a 2 pin, so just put 12v across it and it will move, reverse polarity to go the other way.

      If you are waiting for a motor because yours doesn't move at all you will be able to remove the motor from the drum housing and move the window up then refit the motor to lock the drum back in place. Be very careful though as you don't want the drum to come out and wire to all undo. So if possible get some one to hold drum in housing whilst you move glass.


      Just did this,

      Took the motor housing off and spin if around till the window went up!


      Cheers

      Now put the thing back together ha

      Comment

      Working...