Hi mates,
I recently purchased the tempomat's (cruise control) bits for my 96' S6 C4 2.2T from a forum member, maybe from a B3/typ89 but he did cut the wiring loom from the 6-pin leveler plug.
I have many doubts about the electrical connection as on internet I found many and different setups.
I have here the:
- Throttle actuator with it's connection rod
- Vacuum pump with cutted wires after the plug
- Hella ECU #5GA 004 397-16 (4DO 907 305)
- Pedal pneumatic ventilation valves with electrical connection (x2)
- Steering wheel leveler with tempomat (SAE QB 87 / SWF KLS 96) and 6pin-plug with cutted wires
- Wiring loom with only 3 plugs (ecu brown one, vac pump 3-wire plug, and a unknown 6-pin blue plug)
Unfortunately I have no idea how to proceed with the intallation and no idea as well where is this 6 wire blue plug (image) is connected to, it even has the blue-white wire from maybe the speed signal.
I hope to receive some help as it is impossible to get a definitive wiring diagram fo all this. I have attached the pictures of the loom's plugs. Thank you in advance mates.
I recently purchased the tempomat's (cruise control) bits for my 96' S6 C4 2.2T from a forum member, maybe from a B3/typ89 but he did cut the wiring loom from the 6-pin leveler plug.
I have many doubts about the electrical connection as on internet I found many and different setups.
I have here the:
- Throttle actuator with it's connection rod
- Vacuum pump with cutted wires after the plug
- Hella ECU #5GA 004 397-16 (4DO 907 305)
- Pedal pneumatic ventilation valves with electrical connection (x2)
- Steering wheel leveler with tempomat (SAE QB 87 / SWF KLS 96) and 6pin-plug with cutted wires
- Wiring loom with only 3 plugs (ecu brown one, vac pump 3-wire plug, and a unknown 6-pin blue plug)
Unfortunately I have no idea how to proceed with the intallation and no idea as well where is this 6 wire blue plug (image) is connected to, it even has the blue-white wire from maybe the speed signal.
I hope to receive some help as it is impossible to get a definitive wiring diagram fo all this. I have attached the pictures of the loom's plugs. Thank you in advance mates.
Comment