Vanity Light

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bilko0795
    S2Forum Extremist
    • Feb 2011
    • 1883
    • Country: Wales

    #1

    Vanity Light

    Can anyone shed some lite on how these work i have one that's not working. I decided to take it off and have a look see and there are no wires going to it although the fuse panel cover says that fuse No 4 is the one that protects the circuit have i missed something.
  • Error404
    Super Moderator
    • Mar 2007
    • 19789
    • Country: United Kingdom

    #2
    you mean the lights in the sun visors?
    Panthero Coupé quattro 20vt
    Indigo ABY coupé
    Imola B6 S4 Avant

    Comment

    • bilko0795
      S2Forum Extremist
      • Feb 2011
      • 1883
      • Country: Wales

      #3
      Yes Alex

      Comment

      • Error404
        Super Moderator
        • Mar 2007
        • 19789
        • Country: United Kingdom

        #4
        There is a single red wire that comes out of the base of the mounting and from memory plugs into the interior light for a +12v supply.
        Panthero Coupé quattro 20vt
        Indigo ABY coupé
        Imola B6 S4 Avant

        Comment

        • bilko0795
          S2Forum Extremist
          • Feb 2011
          • 1883
          • Country: Wales

          #5
          Are you sure m8 because as said there was no wires coming from the visor.

          Comment

          • Error404
            Super Moderator
            • Mar 2007
            • 19789
            • Country: United Kingdom

            #6
            I don't think they all have the lights in them. My old white coupe never had them.
            Panthero Coupé quattro 20vt
            Indigo ABY coupé
            Imola B6 S4 Avant

            Comment

            • LHD_Kid
              S2Forum Possessed
              • May 2006
              • 3697
              • Home: England Current: Belgium

              #7
              The mounting base gets the ground through the screw which fixes the visor to the roof, +ve comes via the red wire on the back of the clip plate at the rear view mirror end of the visor. There is a strike plate that comes in contact when the visor is lowered rotating the plate to meet the electrical contact.
              Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
              S2 Coupe... bit easier off the line...
              '03 ZX12-R daily hack.... lots of nice bolt ons...

              Comment

              • bilko0795
                S2Forum Extremist
                • Feb 2011
                • 1883
                • Country: Wales

                #8
                Originally posted by LHD_Kid
                The mounting base gets the ground through the screw which fixes the visor to the roof, +ve comes via the red wire on the back of the clip plate at the rear view mirror end of the visor. There is a strike plate that comes in contact when the visor is lowered rotating the plate to meet the electrical contact.
                Cheers found them didn't realise they were under the main panel amazing what you find when you wear your glasses

                Comment

                Working...