VAG VCDS label files

[curamrdan]

Hello, i think on s2central web, was some better lbl files for our old S cars. But i lost them somewhere and web is now off.

Can somebody reupoad them?

Over year ago i have connected my car (551B ecu), i think i can saw temps and altitude without problem.
But i changed the laptop.
With generic 15.7 or lite 1.2 vcds have ugly block labels.
When i bench test my ecu and 551AA ecu ,now. On 15.7 vcds i see -49c temps (air and water) and 558mbar altitude. With lite 1.2 on my ecu i can see altitude correctly to 9xx, but temps are still wrong, on AA ecu is all wrong. Maybe also lambda factor was sometime 1.002 and 0.xxx (im not sure on which soft or ecu)
TPS showing correctly on both ecus and softwares.

[irishs2]

Here you go.

ZIP contains

895-907-551-B.lbl
895-907-551-A.lbl

and a pdf of the page they came from.

Hope that helps.

Hello, i think on s2central web, was some better lbl files for our old S cars. But i lost them somewhere and web is now off.

Can somebody reupoad them?

Over year ago i have connected my car (551B ecu), i think i can saw temps and altitude without problem.
But i changed the laptop.
With generic 15.7 or lite 1.2 vcds have ugly block labels.
When i bench test my ecu and 551AA ecu ,now. On 15.7 vcds i see -49c temps (air and water) and 558mbar altitude. With lite 1.2 on my ecu i can see altitude correctly to 9xx, but temps are still wrong, on AA ecu is all wrong. Maybe also lambda factor was sometime 1.002 and 0.xxx (im not sure on which soft or ecu)
TPS showing correctly on both ecus and softwares.

[curamrdan]

Thank you! After renaming it works nice.

Otherwise it doesnt solve my issue. Do anybody know, why blocks not showing temps ect.
Im bench testing, or say testing on not fully connected(knock sensors, MAF, ignition coils , N75 + evap valve are not connected) on incomplette engine - im not able to start => to pass ecu to show errors on unconnected items (now showing only fake G28 error).

Here is what i see on two ecus. 551AA also doesnt show voltage.

[macof]

spravnu teplotu ukaze az po nastartovani, pravdepodobne aj atmo. tlak

[curamrdan]

Ok, diky - Thanks