Main Rad Cracked

[BaS2]

Just got to work, bit of steam coming from under the bonnet, had a look, and the top header of the main rad is cracked. Running with aux rad, where's the best place to purchase a new main rad from., cheers.

BAzz

[Crawford_S2]

http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEWA%3AIT&rd=1
I would send this guy a message, just ended not sold.

[Greg_S]

Just dont get a Nissen one, get an OE type one with plastic end caps since the Nissen ones tend to spring a leak after a short time!

[BaS2]

thanks a lot, cheers

[martin richards]

I got mine from GSF @ 115 notes, same as old one less 4 audi rings.
Cheers.
Martin.

[rotoryboy]

I got mine from GSF @ 115 notes, same as old one less 4 audi rings.
Cheers.
Martin.

Me too

[BRY]

£75 + p&p with four rings

[Fat Audi 80]

Me too

Me too! Search under Behr and there is a thread with the GSF part number. (For an ABY one.) let me know if you can't find it....

Cheers,

Steve

[BaS2]

Picked up new Behr rad from BRY ( cheers ), old one is out. The two rubber mounting bushes, one to the right of the rad and one underneath, both came out OK. Does anybody have the part numbers for the rubber mounting bushes? and where's the best and quickiest place to order from? Cheers.

BAzz

[Jas11n]

Picked up new Behr rad from BRY ( cheers ), old one is out. The two rubber mounting bushes, one to the right of the rad and one underneath, both came out OK. Does anybody have the part numbers for the rubber mounting bushes? and where's the best and quickiest place to order from? Cheers.

BAzz

Bottom rubber mount;

Mount = 803 121 273
M10 nut = N 902 856 01 (if needed)

Righthand rubber mount;

Mount = 893 121 273
M8 locknut = N 902 920 01 (if needed)

Left hand (top) rubber mount;

Mount = 443 121 273E
M6 nuts x 2 = N 901 752 03 (if needed)

Vagparts would be my first call for these, failing that the dreaded stealers

HTH
Jas

[BaS2]

your a star, cheers.