what turbo are you running?

[rspeed]

just like the title said. and what is your horsepower .i just need some ideas on turbo size.

[karlblues2]

just like the title said. and what is your horsepower .i just need some ideas on turbo size.

I'm running a K26/27 hybrid. It's an MD147 from Turbo Dynamics. It's rated at 424BHP and 657Nm at 28psi on the S2.
I have nowhere near that power at the moment. Mine is laggy but top end power is great.
HTH
Cheers
Karl
Oz

[JayZee]

I am running a Turbonetics 60-1. I have around 400 hp and 530 nm..the turbo can produce much more power but the rest of the engine is not ready for much more YET! I was told the turbo can produce up to about 550 hp. (correct me if I am wrong)

[palles2]

i have a garret gt35r, and 605 bhp and 774 nm.

[Swe_s2]

Turbo

Running on a T61 turbo. about 360 hp. Turbo is good for 600hp.

//Swe_s2 !

[Billman]

i have a garret gt35r, and 605 bhp and 774 nm.

Can you give us more infos about your car? What other mods do you have?

[Billman]

i have a garret gt35r, and 605 bhp and 774 nm.

Can you give us more infos about your car? What other mods do you have?

[caterpillar]

i will run garret gt 40.....will produce 600++hp.....A/r 0.94 and 2555ccm

[doof]

isnt the flange on the garrett turbo different than the kkk flange?

[Jeffer]

Looks like this is palle's S2

http://www.bilgalleri.dk/html/gal_visbil.asp?ID=24022

I'm running a k27/29 with 5xx hp and 650 NM

[AnLe]

I have Holset HX40 (60/65), hopefully well over 500horses, but due to resent engine failure numbers mystery.

[Mark Halligan]

Looks like this is palle's S2

http://www.bilgalleri.dk/html/gal_visbil.asp?ID=24022

Nice car

[Mark Halligan]

isnt the flange on the garrett turbo different than the kkk flange?

There are differences, although some companies like ATP now make Garrett hot sides with KKK flanges to fit straight onto OEM manifolds.

[Jeffer]

True, and my K27#7 hotside has a rectangular garret flange.
Cheers

[palles2]

Yes

Yes that is my car on bilgalleri.dk