stroker vs rebuilded 3b,wat's better??

[ferenc]

I wan't to rebuild my 3b engine with Pauter rod's en JE pistons for some serieus power(500/600hp).

The turbo thats i will jus is a Garret gt35/40 .82.

But now i read some about a stroker 2.6 engine.It's sounds nice,price is oke .It is very interesting.


But what is better to spend my money on??A rebuild or a stroker???



Sorry for bad english and the strange asked quesion



cheers

[caterpillar]

go fpr the stroker,the power comes earlier than the 3b....the cost are ca the same.

[Billman]

for stroker a bit more for the block modifications

[ferenc]

How about the eurospec strokers???

[Dave cook]

Eurospec Sport 2.6 liter 5 Cylinder 4 Valve engines

Short Blocks

Rally Version $2350.00 :
- Forged Factory Crankshaft.
- Forged Factory Connecting Rods.
- Cast Pistons.
- New Oil Pump, German main bearings, German rod bearings, oil pan.

Race Version $4150.00
- Forged Factory Crankshaft.
- Forged Eurospec 4340 connecting rods.
- Forged JE pistons, your choice of compression.
- New Oil Pump, German main bearings, German rod bearings, oil pan.

[BRY]

Eurospec Sport 2.6 liter 5 Cylinder 4 Valve engines

Short Blocks

Rally Version $2350.00 :
- Forged Factory Crankshaft.
- Forged Factory Connecting Rods.
- Cast Pistons.
- New Oil Pump, German main bearings, German rod bearings, oil pan.

Race Version $4150.00
- Forged Factory Crankshaft.
- Forged Eurospec 4340 connecting rods.
- Forged JE pistons, your choice of compression.
- New Oil Pump, German main bearings, German rod bearings, oil pan.

What torque can the rods take?
Who's prices are those?
Thanks

[UrS4]

What torque can the rods take?
Who's prices are those?
Thanks

Not sure about how much torque the factory rods can take but the forged eurospec 4340 are H-beam rods made by Eagle.
The rods can take 600+hp.
The prices are from Eurospecs website: http://www.eurospecsport.com/

[ferenc]

Is it possible to rebuild my 3b to a stroker??

aan and 3b engine are thesame???


Ore find a 2.5 5cilinder diesel

[palles2]

go for a stroker 2,6, i have one with 605 hk and 775 nm, with a garret gt35r 0.82

it drives like a normal car, because the boost comes very easily...

[ferenc]

Can you give my more information about the stroker????

[Ski]

palles you have the eurospec stroker?

[dan_b]

What does "stroker" mean, excuse my ignorance...

[BRY]

You can increase the capacity of your engine by increasing the bore diameter of the cylinders or increasing the stroke of your crankshaft, or both.
Bored Out / Stroker or both!!

[dan_b]

Aah, of course, thanks

[Ski]

so can these strokers go higher than 600hp ?

im thinking of getting one of these suckers to replace my 200k aby.