Question about injector flow...

[archiboy24]

I have a set of injectors rated at 37 lbs @ 3.0bar. Does this mean if I run them with a 4.0bar FPR, they will push 50 lbs?

[twoqu]

Hi!,

Short answer is no!
Flow is not proportional to pressure.

[twoqu]

Here you are!
http://www.rceng.com/technical.htm.
Scroll down to get the calculation you need.

[pastures16]

or try this flow rate table for all makes http://users.erols.com/srweiss/tableifc.htm#ACCEL