under boosting RS2....

[Mihnea]

Glad to hear this is sorted Damian

[S2central.net]

Yes, afraid so! All of the good engine characteristics stayed as per std UR but starting, idling, pickup, high rev power and just about anything else improved. The system really has been amazing. I did it with Quattronut (see www.quattronut.org) who are real URQ enthusiasts. It was not an easy conversion though - be warned. Have had endless other things done to my car since and the motronic has been able to adapt to it all with no problem.

Ahhh - you have one of Steve D's 10V Motronic animals - I did the initial mapping for Steve based on a hybrid of RS2 and WR information. I assume he has had that tweaked to perfection now !

Paul

[DamoM]

Ahhh - you have one of Steve D's 10V Motronic animals - I did the initial mapping for Steve based on a hybrid of RS2 and WR information. I assume he has had that tweaked to perfection now !

Paul

I effectively bought the exact one which you had done the map for. It has since been mapped by Mihnea and Doug. k26/gt3071, tubular EM, hybrid 10v/20v IM, and combined charge and intercooling will means another visit for mapping tweaks. Feels really good though! Hoping that she will be a fun trackday car....looks completly std so the proverbial wolf in sheeps clothing !!

[porkkis]

Yes, sorted finally on Friday!! After more or less pulling the engine to bits, my last resort (as previously suggested on here I might add!) was the knock sensors. I swapped them with ones off of my urq and lo and behold full boost....!

Great!