bought wrong fuel pump

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • maRS2
    S2Forum Addict
    • Oct 2003
    • 366
    • Home: France Current: Thailand

    #1

    bought wrong fuel pump

    I decide it was time to change the fuel Pump on my RS2

    I looked on the Etka for Pin and went to a bosh dealer to order it
    gave him AUdi pin that I found on ETKA 895 906 089 E and he translate it to
    Bosh Pin 0580 254 040_390.
    He had it on stock. I arrive home, took out my pump from the tank and the pump is much thinner than the one I just bought.
    The pin righten on my RS2 are 895 906 091 B and it look it's not even bosch.

    So what is the good one?
    Is theire a bosch pump that is sraight swap in RS2?
    RS2 chip by mihnea,PKM short IM, forge dump valve, 3" custom stainless exhaust, 18"X8" Porsche 996 rims, conti contact 245/35 Front 225/40 Rear, QR sport top mount, Powerflex bushes, aloy sub frame bushes, neuspeed 19mm RARB,Hard tranny mount, V8 torsen on RS2
  • maRS2
    S2Forum Addict
    • Oct 2003
    • 366
    • Home: France Current: Thailand

    #2
    reading thread about motorsport fuel pump it look like I bought a Bosch 040
    So i will need the same part's as to fit the 044.

    M'i Right ?

    What Hp can the 040 flow?
    Does it flow more than the original RS2 Pump?
    RS2 chip by mihnea,PKM short IM, forge dump valve, 3" custom stainless exhaust, 18"X8" Porsche 996 rims, conti contact 245/35 Front 225/40 Rear, QR sport top mount, Powerflex bushes, aloy sub frame bushes, neuspeed 19mm RARB,Hard tranny mount, V8 torsen on RS2

    Comment

    • BRY
      S2Forum Possessed
      • Nov 2004
      • 3755
      • Home: United Nations Current: Vietnam

      #3
      The upper parts are the same, however, the lower part of the 040 is open with a mesh and I don't think it will reach the bottom of the tank!
      Kingdoms are run by Kings, Dictatorships are run by Dictators.
      England must be a Country. :mischeif:

      Comment

      Working...