cam belt time

[pastures16]

well im in need of changing the cam belt on my aby but can i **** find it in the autodata book no such one listed can anyone help me out with spec and a pic

[Bibby]

Don't have pics, but change the pulley and bolt while you're at it. You just need the right tool I think, it's torqued quite high.

[pastures16]

got all the tools im a hgv mechanic but no manual doh

[philS2]

got all the tools im a hgv mechanic but no manual doh

it's pi$$,just the same as doing a 10v belt except you have to remove the bumper and intercooler.

[philS2]

oops,i guess YOU don't.

[pastures16]

ive done 10v loads and the 7a twice cab you give me any hint of where the markings are

[pastures16]

oops,i guess YOU don't.

eh

[philS2]

they're all the same.one on the lower cambelt cover to the bottom pulley. another on the cam pulley to rocker cover.and last but not least the '0' on the flywheel.well that's on the s2 anyway.what i meant was you won't have to take the intercooler off.

[philS2]

but i was reading your profile rather than the post that clearly states your doing an aby.

[pastures16]

you were saying

[philS2]

i guess they're still the same as the 3b though.thing is,i like guessing a lot.

[MATI]

You can find useful info and pictures for a timming belt replacement on a AAN engine which is very similar to yours at the web side :

http://www.sjmautotechnik.com/trouble_shooting/S4timing.htm

regards
MATI

[pastures16]

cheers very helpful

[jade]

You will need a locking tool for the pulley , Which needs 450nm on the bolt !!!
Which can be made from 55mm box section with a slot cut out for key & a real big spanner
Jade

[BRY]

You will need a good 1" drive breaker bar, as Mr Ben broke the one @ Derby Audi trying to get one of ours off!