Schematic for 3B vacuum hoses

[AndyP]

Has anybody got a schematic of where all the vacuum hoses go on a 3B engine??

Basically we started doing some work on the S2 project car this week and it seems nearly all the vacuum lines are cracked or broken or not connected. There are 3 that tap into the inlet manifold just below the throttle body, now I think(?) that one goes to the fuel pressure regulator, one to the ECU and the other to the WGFV, could do with some confirmation of this as one of them has a 'T' piece in and I'm not sure what that feeds.

I've bought a load of vacuum line from GSF and the plan is to replace all the vacuum line if I can work out where they all go

[jon_91_s2]

I think that the one nearest to the battery(best way I could think to describe it) goes to the dv, the centre one to the fuel pressure regulator, the one on the right to the ecu. Might of got the second 2 the wrong way round. Im at work at the mo and my car is sat at home leaking coolant so cant have a look.

Sure someone else will know for sure.

Sorry not much help Andy but i tried.

Cheers.

[jon_91_s2]

Someone must be able to have a better stab at this than me.

[jon_91_s2]

Andy, just had a look under the hood of mine. Its a bit difficult to see but I can post a pic with a slightly better explanation if thats any help. Or you could phone me and I could describe it.

[AndyP]

Cheers John, I think I have enough information from your first post, besides I don't think I can make it run any worse than having none of them connected

[jameswkr]

Do a forum search. Paul Nugent posted a drawing showing exactly what is connected to where.

[AndyP]

I have been searching for that but I can't find it. I think I've got it sorted now but the drawing would still be handy if anybody knows where it is.

[S2central.net]

I have it at home - send me a PM to remind me... I also cannot find it here !

Paul

[Billman]

I want it too if you can paul!

[jameswkr]

Search using "vacuum tree" - its the 3rd thread shown...............