Hallo everyone!
The last days i read in many sites about Eagle Rods! Does anyone of you heard about these rods! They are very cheap Forged in China Sized and finished in the United States.
They make also Crankshafts out of 4340 forgings!
Eagle "ESP" H Beam Connecting Rods Feature:
* First connecting rod manufacturer to machine on the state-of-the-art Sunnen Krossgrindingâ„¢ System to hold extremely tight tolerances! Center to center length +/- .001 Big End Barrel / Bellmouthing +/- .0002 Big End Bore +/- .0002 -- Pin end bore +/- .0002
* Stroker Design provides cam clearance for 3.800 on small block Chevy engines with no modification. Stroker design provides cam clearance for 4.250 on big block Chevy engines with no modification.
* Weight savings between 30-70 grams (depending on rod length).
* Reduce balancing cost! Larger stroke applications can see savings of $100.00 to $200.00 on balancing cost alone!
* Over 80 different rods available for popular Chevrolet, Chrysler, Ford, Oldsmobile, Pontiac, AMC, Nissan, Acura, Honda and Toyota engines!
* All Eagle "ESP" connecting rods are available individulally or in sets. Please specify weights on individual rod purchases.
* 3-D Design offers the advantages of reduced weight without sacrificing any of our original rod's strength, offering maximum strength to weight ratio.
* 2-Piece forging for increased strength.
* Ready to run, installation instruction and bolt lubricant included.
* ARP 7/16" 8740 Capscrew bolts standard (190,000 psi) unless otherwise noted. Optional ARP 2000 (230,000 psi) and ARP L-19 (265,000 psi) bolts for extreme horsepower applications. L-19 bolts are recommended for small block engines exceeding 700 horsepower and big block engines exceeding 850 horsepower.
* Silicon bronze bushings for floating piston pins.
* Multi-stage heat treated.
* Packaged in weight matched sets end to end +/- 1 gram.
* Certified 4340 steel, vacuum degassed to remove impurities.
* Each forging is X-rayed, sonic tested and magnafluxed to insure quality.
* All surfaces are 100% machined.
* Shot peened to stress relieve the metal.
* Precision alignment sleeves positively locate the rod cap, maintaining big end bore size and eliminating cap walk.
* Eagle "ESP" Connecting Rods provide the strength and durability required in unlimited engines at a sportman rod price.
* All Eagle "ESP" Small Block Chevrolet Rods now feature a .050 shorter bolt head for increased block clearance!
* Forged in China.
* Sized and finished in the United States.
Any comments? Are they worse than these Stern PArner or the Eurospec?
And by the way: What kind of Rods are they offered from Javad 034Efi? Who makes them?
Greetings
The last days i read in many sites about Eagle Rods! Does anyone of you heard about these rods! They are very cheap Forged in China Sized and finished in the United States.
They make also Crankshafts out of 4340 forgings!
Eagle "ESP" H Beam Connecting Rods Feature:
* First connecting rod manufacturer to machine on the state-of-the-art Sunnen Krossgrindingâ„¢ System to hold extremely tight tolerances! Center to center length +/- .001 Big End Barrel / Bellmouthing +/- .0002 Big End Bore +/- .0002 -- Pin end bore +/- .0002
* Stroker Design provides cam clearance for 3.800 on small block Chevy engines with no modification. Stroker design provides cam clearance for 4.250 on big block Chevy engines with no modification.
* Weight savings between 30-70 grams (depending on rod length).
* Reduce balancing cost! Larger stroke applications can see savings of $100.00 to $200.00 on balancing cost alone!
* Over 80 different rods available for popular Chevrolet, Chrysler, Ford, Oldsmobile, Pontiac, AMC, Nissan, Acura, Honda and Toyota engines!
* All Eagle "ESP" connecting rods are available individulally or in sets. Please specify weights on individual rod purchases.
* 3-D Design offers the advantages of reduced weight without sacrificing any of our original rod's strength, offering maximum strength to weight ratio.
* 2-Piece forging for increased strength.
* Ready to run, installation instruction and bolt lubricant included.
* ARP 7/16" 8740 Capscrew bolts standard (190,000 psi) unless otherwise noted. Optional ARP 2000 (230,000 psi) and ARP L-19 (265,000 psi) bolts for extreme horsepower applications. L-19 bolts are recommended for small block engines exceeding 700 horsepower and big block engines exceeding 850 horsepower.
* Silicon bronze bushings for floating piston pins.
* Multi-stage heat treated.
* Packaged in weight matched sets end to end +/- 1 gram.
* Certified 4340 steel, vacuum degassed to remove impurities.
* Each forging is X-rayed, sonic tested and magnafluxed to insure quality.
* All surfaces are 100% machined.
* Shot peened to stress relieve the metal.
* Precision alignment sleeves positively locate the rod cap, maintaining big end bore size and eliminating cap walk.
* Eagle "ESP" Connecting Rods provide the strength and durability required in unlimited engines at a sportman rod price.
* All Eagle "ESP" Small Block Chevrolet Rods now feature a .050 shorter bolt head for increased block clearance!
* Forged in China.
* Sized and finished in the United States.
Any comments? Are they worse than these Stern PArner or the Eurospec?
And by the way: What kind of Rods are they offered from Javad 034Efi? Who makes them?
Greetings
nobody??? 
SPM have the cheapest(lightest??) conrods in stock. 
Have been visiting him sometime: have 1900km to visit the gui,one way 
i know ES tunig broke a rod.. i think it was bought from KRB trading..
Comment