Question for K26/27/29 guys

[Krists]

Hi!
I got my dirty hands on this turbo:

Hersteller: KKK
Grösse: K27
ATL Nr: 91 098 1855
Ausf: Nr: 5327 370 6205

Compressor wheel has 14 blades, so it might be 3.2" wheel


For now I have rs2 (with 2.7" comp.wheel) turbo mounted on rs2 ex.manifold. What I wish is more high-end power.
We have good turbo-repair&balancing services here in Latvia, so building some kind of K27/k26 hybrid would be dirty cheap!Also one of my porker friends made K26/K28 hybrid here.

I've been figuring about 3 ways in my mind so far:
1. K27/K29 cold side - K26 center section - K26 #6 turbine wheel&housing from 10VT
2. K27/K29 cold side - K26 center section - K26 #8 turbine wheel&housing (From porkers, does it even has water cooled center section or can be bolted to regular audi K26 center section?)
3. K27/K29 cold side - rs2 center section (no difference?) - rs2 turbine housing&wheel

Number 3. wouldn't be the best from my standpoint as the turbo is in well condition and might be sold for a good money
I will stick with the rs2 ex.manifold and stock rods so K27 hotsides is out of question

Thanks in advance!

[Audi Parts Guru]

What part number is on the bule plate?

[Krists]

Bule plate? - I typed which numbers are seen on KKK plate! I have no other info available Any ideas?

[aronmatic2]

i had the no1. kit on my old config.
26/26/27 with 6 hotside.
wery good. kicks from 3000rpm
max 400whp i think.

[aronmatic2]

pic here:

[Audi Parts Guru]

Can you take a close up picture of the bule plate?

[Krists]

sorry, it's impossible cause the turbo is in the shipping process right now