Just a little query for the guru's, i recently had my car dyno'd and the results showed lean running which i think is the fuel filter restricting fuel flow and the high output turbo i fitted, but the dyno gragh only shows 12psi peak boost pressure, would lean running make the ecu limit boost pressure if the lambda shows lean running.
Lean running
Collapse
X
-
-
Standard S2 is set for 0.8 bar of normal boost which isn't too far away from 12psi. Overboost will give 1 bar (14psi). Get a custom remap as you may will more than likely have high exhaust temp from lean running. Not recommended! And you'll get more power as it'll fuel better. Bonus!Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
K26/T04E Highout OutputOriginally posted by martinjsYour new turbo will be flowing more air than a K24, without a remap you wont be getting the best from it. Be careful you dont burn any valves etc.
How big is the turbo? bigger than RS2?
sigpicComment
-
-
12psi is 12psi nomatter what turbo you useOriginally posted by martinjsYour new turbo will be flowing more air than a K24, without a remap you wont be getting the best from it. Be careful you dont burn any valves etc.
How big is the turbo? bigger than RS2?
(same amount of air into engine)
Comment

Comment