To change engine!!

[Ski]

U need a 6 speed box.

[BRY]

You can tune the 3b engine to 380hp if you want to.

[400hp_project]

BRY i know but if i decide to put 6-speed gearbox is because i think that 5-speed don't resist this power a lot, and the reason to put aby ECU is to obtain a little more stable engine. what do you think?

Please all comments are going to thank

[magarv]

A good question magary, because i want to obtein arround 380-390hp and i think that 5-speed gearbox cann't resist. I don't use my S2 every day, only weekends and not all weekends, only when i want to enjoy, if i do a long travel on holidays or if i go to a meeting. And i think to put 6-speed gear box because i'm not bout spacerplate is it. Well if i only have to put the RS2 engine using muy flywheel&clutch i will do with my gearbox at the moment.

Other possibility i'm thinking about is to buy the RS2 engine, with ECU but only put the parts i need to obtain arround 380hp and other parts i could sell or keep.

I would definitively go for the last one. Buy the RS2 parts and a propper chip/map with the 3B ECU!

I am aiming at 400+ hp (3B and 5-speed) but with tubular exh manifold and Turbonetics T04E Turbo instead of the RS2 parts. If the gearbox can´t keep up I´ll change it later.

Magnus

[Sidspud]

I'm sure Audiman has well over 400BHP from a 3B with a 5 speed box. Might be worth a PM in his direction.

[400hp_project]

Thanks for your replies, it's very interesting. Thanks.

Magary what chip/map you recommend me? Minhea?

[magarv]

Thanks for your replies, it's very interesting. Thanks.

Magary what chip/map you recommend me? Minhea?

Yes I´ve heard he has a good reputation. It is several suppliers who can supply chip to the RS2 setup with 3B ECU.

I am going to use Jonus/Tor Øyvind Skinne. (Who you can read about here: http://www.s2forum.com/forum/showthread.php?t=14504)
They just made 740HP (7100RPM) on 98 oct pump gas with the 3B ECU.

Magnus