After Run Cooling System Fixed

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts

  • Thuppu
    replied
    Lets post this same info in this thread also...

    Bosch 0 392 020 034 fitts plug and play, cost 30-40e.

    Pic:

    Leave a comment:


  • johne
    replied
    Originally posted by Biggss2
    Does anyone know the part number for the sensor? Im 99% sure mine doesnt work!

    fan was on 24/7 before i changed 324 relay under steering wheel, now fan only comes on when temp creeps above 90degrees.
    Which is exactly what it should do so it looks as though your system is workimg normally now.

    John

    Leave a comment:


  • Biggss2
    replied
    Does anyone know the part number for the sensor? Im 99% sure mine doesnt work!

    fan was on 24/7 before i changed 324 relay under steering wheel, now fan only comes on when temp creeps above 90degrees.

    Leave a comment:


  • Audi500HP
    replied
    Golf GTI pump

    Originally posted by willg54
    does anyone know if the pump from GSF is a straight fit??
    I installed a Golf GTI/Audi TT, its straight fit... plug and play.

    Bosch 0392 020 039
    VAG 078 965 561

    Fernando

    Leave a comment:


  • willg54
    replied
    does anyone know if the pump from GSF is a straight fit??

    Leave a comment:


  • UrS4boy
    replied
    After-run Auxiliary Coolant Pump and Fan Switch and Relay Info

    Originally posted by jevrem
    Where is locate that relay for afterrun system on urs4 1992?
    Sorry I wasn't around to answer back then and I didn't see the new post yesterday (Nov. 23, 2011). If I had, I would have linked you to this post:

    The Audi Enthusiast website. Forums for all Audis including A4, S4, A5, S5, A6, S6, allroad, A8, S8, TT, R8, Q5, Q7, 4000, 100, 200, v6, v8, vintage, local forums


    which has this photo:

    Leave a comment:


  • Audi500HP
    replied
    Victoria

    Originally posted by tscheel
    Mine had the same problem - replaced the big controller in the relaypanel under the steering wheel. i think its brownish and have #326?

    EDIT #324 it is : http://www.s2forum.com/forum/showpos...11&postcount=6

    Entire thread : http://www.s2forum.com/forum/showthread.php?t=45349
    Ohhhhhhhh yes, problem resolved!!! its the relay number 324 above the pedals!!

    Thanks for the help.

    By the way the relay cost me 100 euros... not funny. My car has 100k kms only, another one added to the list.

    Leave a comment:


  • tscheel
    replied
    Mine had the same problem - replaced the big controller in the relaypanel under the steering wheel. i think its brownish and have #326?

    EDIT #324 it is : http://www.s2forum.com/forum/showpos...11&postcount=6

    Entire thread : http://www.s2forum.com/forum/showthread.php?t=45349
    Last edited by tscheel; 24 November 2011, 12:43.

    Leave a comment:


  • Audi500HP
    replied
    Hi there, I need some help, I can´t stop afterrun system.

    I replace the sender and the 214 relay. All the fuses tested and ok in the fuse box.

    The only way to stop it, is removing one of the 214 relay´s.

    My car is an 1994 coupe ABY engine.

    Many thanks
    Fernando

    Leave a comment:


  • gedu
    replied
    Fan "thermostat"/thermal switch not connected? Dunno if it's on radiator as it's in the larger body (UrS)

    Leave a comment:


  • Azman
    replied
    Hi guys.
    Just changed the little switch and the mfts on the water rail. Refilled the coolant as I took the rad out.
    Okay start car wait to get hot and now the fan foes not even come on at all. Suggestions please. Checked all the fuses in the engine bay and all okay. Where to go next

    Cheers
    Aaron

    Leave a comment:


  • jevrem
    replied
    Thank's!

    Leave a comment:


  • quattro20v
    replied
    Jevrem here is some good info:

    Leave a comment:


  • s2martyn
    replied
    Originally posted by jevrem
    I have problem with my after run system. when i conect two wires at the afterrun sensor the pump is working but the electric fan isn't. I check the fan and is OK. Does anuone know why the fan won't start when I start afterrun system.
    Than'x
    can anyone shed any light on this please as mine has the same fault...
    bridging the wires accross the afterrun sensor the the pump runs but fan does not...also i checked the fan operation and that is ok..i have changed the j155 relay also and his has no effect

    Leave a comment:


  • jevrem
    replied
    Where is locate that relay for afterrun system on urs4 1992?

    Leave a comment:

Working...