S2 wont start

**BRY** · 2 June 2006, 21:24

Have you checked the pin on the flywheel?
Will it push start?

**s2avantdk** · 2 June 2006, 21:33

i cant se anything on the flywheel. under these 2 sensors. !!!! can this "pin" fall off. ??
i have not try to push it.

**BRY** · 2 June 2006, 21:35

Yes the pin has been known to fall off.

**BRY** · 2 June 2006, 21:36

Read this

**s2avantdk** · 2 June 2006, 22:13

okay, thanks bry. i have A bate filing that this pin is broken. so the engine must come out.

**DJones** · 3 June 2006, 08:55

Originally posted by s2avantdk

okay, thanks bry. i have A bate filing that this pin is broken. so the engine must come out.

You can (if your good with a welder) spot weld a pin in place after taking the starter motor out its tight but possible. some people have tapped the hole that the pin fell from and lock tighted a piece of threded rod in it

**s2avantdk** · 3 June 2006, 13:55

i will try that Djones. :-)
any one with are picture off this Pin. ???

S2 wont start

S2 wont start

Comment

Comment

Comment

Comment

Comment

Comment

Comment