3 pin multifunction plug wiring

[dubzi]

My Multifunction plug is no longer there, the wires have been put on the pins with spade connectors. Unfortunately the wires have broken away from the spades now and were when I bought the car.

I have 4 wires, 3 pins and no idea which goes to which!

The layout is

0V1
2-3

Where 0 is the position with no pin V is the notch on the plug.

Can anbody tell me which wire goes to which pin?

Thanks!

[AndyP]

Try this:-

http://www.sjmautotechnik.com/trouble_shooting/cooling.html

[dubzi]

Thanks,
That's pretty good and gives me a place to start, the only thing is the colour codes don't correspond to mine. I'm sure I can use this and a wiring diagram to work out what's going on though.

It's a 2.3 NG engine, by the way, so not an S2 really!