Do you think this could be causing my 4psi Boost Problem??!!

[s2dude]

ok.

well after getting thoroughly ****ed off with the cars lack of boost I stripped the front end off to check and replace hoses and lots of other bits.....

I found this



JK!







WTF!!!!

I'm not sure what it has been rubbing on

[WabTheKing]

why the fook are you trashing my swede with that top picture!!!!!

[s2dude]

why the fook are you trashing my swede with that top picture!!!!!

Hehe

[s2_bo]

Does any one have the part number for this hose on a 3B. i tightened my forge clips to tight and it has dented the plastic hose resulting in a boost leak

1.jpg

[Fat Audi 80]

i have never seen as S2 with the radiator on the other side before. That could be your problem.

[s2dude]

Does any one have the part number for this hose on a 3B. i tightened my forge clips to tight and it has dented the plastic hose resulting in a boost leak

[ATTACH]9779[/ATTACH]

PN 034 145 747

or thats the PN on mine anyway

hth

[s2dude]

i have never seen as S2 with the radiator on the other side before. That could be your problem.

Its the reverse engined model

[S2-racer]

wonder if i have the same 'holy' problem causing my boost leak

note to self- do not over tighten clips on plastic pipes!!

[s2_bo]

PN 034 145 747

or thats the PN on mine anyway

hth

Great mate!!
ill get one ordered

[s2dude]

Great mate!!
ill get one ordered

Whoa

Are you after the plastic bend as opposed to the hose??
If so you could just quote the Pn to the dealer and they will easy find the plastic curve...

This pn is for the HOSE!!

[s2_bo]

Yeah, thats what im doing. But i didnt have the PN handy and didnt fancy removing my bumper just to look at the litle plastic hose for a Pn.

Ill get one from the Stealer tomorrow.

Cheers again.
Bo


!!almost £35 from Stealer!! - any one got one of these thye can sell me cheaper?