Wat Crankshaft is this??

[marius_s4]

is this good for AAN,ADU,ABY,3B engine?????

[marius_s4]

.........

[caterpillar]

i dont think there are any BIG difference on any il5 crank. if the cranc are the std stroke 86,4...it will fit right in. check out the oilpump, and the valve who got the oil to the head,and cams.
psst: that pics are from a petrol block have you seen the diesel ones

[marius_s4]

[SteveH]

Looks like a sealed drilling hole for one of the oil galleries in the crank. You don't have this on the 7A,3B and ABY crank.

[marius_s4]

That bal it coud be a problem ????????

[jogi730]

i dont think there are any BIG difference on any il5 crank. if the cranc are the std stroke 86,4...it will fit right in. check out the oilpump, and the valve who got the oil to the head,and cams.
psst: that pics are from a petrol block have you seen the diesel ones

There are 2 different cranks - the diference being the size of big end journals (some have 48mm whereas the others have only 46mm). I know this as I had problems when I bent my crank at GTI International a couple of years ago and needed to source replacement.
Cheers
Chris

[mcandmar]

"I bent my crank at GTI International" how on earth did you manage that? ..respect

[jogi730]

"I bent my crank at GTI International" how on earth did you manage that? ..respect

Oh dear, not you as well?

http://www.s2forum.com/forum/showthread.php?t=4614

Well this was my very first post on this forum - how did you manage yours?
Cheers
Chris

[mcandmar]

No i didnt, was just curious how you manged it, never heard of somebody bending an i5 crank before