HELP!! No spark?

[sacs2]

Hi, I was wondering if anyone had an idea whatt could be up with my 3B. I have just rebuilt the top end and put a new turbo on and oil lines etc and have come to start her up but im not getting a spark at the plugs at all? I have checked all the wires and conections and fitted a new rotor and cap and plugs. Im not that hot at the electrical side of things so would be real gratefull for some advice on this 1.

Im so close to getting her back on the road after 10 months its driving me mad

Thanks

Si

[zlobo]

check cabel to the hal sender G40 and then check the rpm sender on the crank g4 g28. also check that the ignition is zero calibrated. if every thing is ok. check it there is power at the..

[Jas11n]

All timed up correctly?

[martinjs]

Double check all the timing marks line up at TDC, flywheel, cams, cam sprocket, and especially dizzy, rotor must be aligned exactly to main body etc.