Hallo does eny body know hove strong the stronges Audi 5cyl turbo is?
Strongest Audi 5cyl
Collapse
X
-
809bhp and 843Nm:eek2:
Tell us more! That is awesome. Cast iron block and stock crank? I am guessing you must be using nitrous or high revs to achieve these power figures?1995 S2 Avant with some upgrades
Designun Limited....
Aerospace, Space and Motorsport Design Consultancy and hardware supply.Comment
-
I hope Matte doesn't mind me telling you that it's stroked and bored to 2.4 liters which means stronger pistons, stronger rods and steel crank. It has main bearing girdle, raceware studbolts, titanium trough/tray? bolt, bigger oilcooler, bigger valves, mechanical lifters, titan retainers, PM- intake, PM-Intercooler, 1.5" Godzilla dump, HKS 60mm wastegate, huge turbo, PM-Exhaust manifold, 4" downpipe, biggest Green cotton airfilter, 990cc injectors, PM-fuelrail and so on
Do i need to say it's the coolest s2 i have ever sen IRL?
The finish is extreme:
Comment
-
-
You need to se it hear it on the strip or on the tracks like i did.
i saw it on mantorp i may and i thugt it was rely fast but now its faster.
i hope i will se it on emmaboda in may!
Last edited by zlobo; 15 January 2004, 00:13.ABT C5 Lord Of The Rings
2004 1/4 Mile ET 12.00 191Km/h @1,5Bar
2009 1/4 Mile ET 11.92 213Km/h @ 1,5Bar 437WHp
2010 1/4 Mile ET 11.45 110Km/h @ 1,5Bar 437Whp
kostic.nuComment
-
Do you have some video of this car ?S2 Avant......fully loaded :rock: :bow: Slipper Wagons Rule !!!!!Comment
-
Nice car !!
Well the 800+ hp and monster torque of this car clearly shows that all our concern about supposed limitation of performances over 3B and even ABY and RS2 intake manifold where absolutely groundless...
Look just the maintenance holes have been removed......Comment
-
F*ck me!!!!!!!!!!!
Now, please, out of interest, tell me that I didn't understand it right (in whatever language that is written on Nordicaudi.com, I'm bad at recognizing scandinavian languages) and that you're not having that on a straight K26/27 turbo with an RS2 exhaust manifold!!!!
****, that turbo really looks like a straight K26/27!!!
Any important data to share about the car and the way it runs?
Boost from xxxx RPM?
Boost at peak HP RPM (and what RPM)?
EGT data
Lambda at WOT?
All I can say is hats off!!!! I had seen the car on Nordicaudi about 1 year ago (maybe less) but I didn't know who to ask all these questions....
Cheers and good job man!!!!
Mihnea'98 Silver Grey 2.7T S4, dual 2.75" turbo back exhaust with no cats, FMIC, BIG injectors, 10 Bar motorsport fuel pump, modded RS4 turbos, tubular exhaust manifolds, custom intakes, RS4 MAF, Bilstein PSS9, H&R ARBs, 19" BBS CH, custom remap, 511 BHP/505ft-lbs
www.MRCTuning.com
info@MRCTuning.com
Workshop DirectionsComment
-
That's the old engine. That one got a rod thru the engine block!Originally posted by Pisobiker
Nice car !!
Well the 800+ hp and monster torque of this car clearly shows that all our concern about supposed limitation of performances over 3B and even ABY and RS2 intake manifold where absolutely groundless...
Look just the maintenance holes have been removed......
I'll see if i can scan a few newer pictures from a magazine...Last edited by Floddy; 15 January 2004, 06:19.Red cars are the fastest ones...
- Team Irry -Comment
-
Here's some pictures:
And the attached one...Attached FilesRed cars are the fastest ones...
- Team Irry -Comment

Comment