Running it on V-power at the mo so that should help it a touch. Tis a pain only having the one car or I would have the engine out and start rebuilding now so it was fully ready with all new bits for next summer.
Cheers Guys
Cheers Guys
-
Dark Grey Avant
RS2 FARB
Powerflex Front wishbone bushes
Alloy Subframe Bushes -
@Azman - I can do you some stock 3B chips to get you away from those bullsh@t Digitec items. PM me if interested - I'd just need a few quid to cover cost of chips & postage.
PaulPaul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
Comment
-
Do you think that would help considering the mods that are on the car though???
Cheers , if you think the they would let me know.
Once again cheers guys.Dark Grey Avant
RS2 FARB
Powerflex Front wishbone bushes
Alloy Subframe BushesComment
-
Boost help!!!!!
Another part of the problem was a boost reading at the dump valve. Now from where it is 't'd off we got a reading of 1.1 bar (0.6 at the dump valve end). So could this be a problem as the FPR is 'T'd off the same junction!!!!!!
Just been doing lots of pondering you see and mentioned it to a mate and we came up with that.....
Only question is - how to check?
Poss remove boost guage and get it plumbed in at all the T junctions and see where the leak is???
Any ideasDark Grey Avant
RS2 FARB
Powerflex Front wishbone bushes
Alloy Subframe BushesComment
Comment