Crank position pin

[flat out 90]

hello all first time asking a question on hear. when the engine is at TDC should i be able to see the crank position pin through the sender hole. iv got some problems with the the fly wheel and im just trying eliminate one or two things.

[rxl]

you should see a line on the flywheel
Flywheel_Line_Mark.jpg

[flat out 90]

hi thank you for your response ye iv lined all that up. but i was sure i should see the pin in the holes where the senders are

[Error404]

The pin is 58deg BTDC

[rxl]

what problems do you have with the flywheel?