about connecting rods on 7A

[djpeck]

Hello.

I am rebuilding my 7A engine, but here in Spain is dificult to find components for this engine.

I saw the parts catalog but finally I dont know very well if the KV, NG and NM share the same connecting rods with the 7A


Anyone knows about it?

[Costash]

Why change your rods for?

[djpeck]

Why change your rods for?

I had problems with the crankshaft, it started with a noise in one cilinder at a constant rpm.
When we opened, we saw that the crankshaft and the bearings have a scratch, and that connecting rod has rod bearing in band condition.

Now I have other crankshaft in good condition but I need to replace the damage connecting rod.

I have the connection rods from a KV engine but I dont know if it shares them

[Mikes2]

7A rods only fit the 7A

[quattrito]

I had problems with the crankshaft, it started with a noise in one cilinder at a constant rpm.
When we opened, we saw that the crankshaft and the bearings have a scratch, and that connecting rod has rod bearing in band condition.

Now I have other crankshaft in good condition but I need to replace the damage connecting rod.

I have the connection rods from a KV engine but I dont know if it shares them

Hey, I have set of rods in top condition from 7A, if interested PM me.

[GazzaG60]

golf 16v?

[GazzaG60]

9a 6a kr, pl

[djpeck]

I told it because I see that the 027198401C has the same code like KV, NG, NM, 3B and ABY...
And volkswagen engines have the same code
Also, the other codes are diferent

[Error404]

I have an 7A rod here, yours for free if you cover postage