ABY head on 3B

[adampug11]

is this a straight fit, obviously need to convert to coil plugs. But is there any other obstacles.

Can an I use my 3b timing belt setup ? Does the water manifold fit ?

cheers
adam

[rs200]

those are the same engine heads..

[mac2226]

if you use aby head on 3b short block yes and for wm I think there the same.

[adampug11]

Good news. Thanks guys !

[A1QSHIP]

If using ABY camshafts then there will be no gear on the back end of the intake camshaft to drive the 3B distributor. Would at least need to exchange the intake camshafts.
HTH,Chris

[adampug11]

i was planning to run my 3B inlet cam with a 7A exhaust cam. Is this a good setup?

i am getting rid of the dizzy in favour of the hall sender so it does not matter about the cam gear.

[MOTORHOOLIGAN]

3b have a hall sensor in a distributor. But the aby have this hole closed(no distributor) and have the hall sensor in front, in the camshaft pulley

I thinks you don't have any problem for this.


If you needs pics I'm have this two engines in my home


Best regards from spain