Stoker build

[mllen89]

Hi

Have a question about my stoker build
i have a 236mm blok with 95.5 crank
155mm rods.

i am looking for pistons.

i have spare new one in stock. can i use Thise pistons
je 81mm 8.5.1 its normal for the 2.2 engine.

i want to run 8.5.1 cr. In my stoker blok.

[AndyP]

FCP were the only place I knew that used to list pistons for the stroker conversion, but I can only find ones for the 159mm rod now, might be worth getting in touch with them

https://fcp-engineering.com/en/

If they don't do them you'll have to order direct from JE, CP or Wossner.

[mllen89]

I will try. Thanks

but i dont wanna order new. If the je set i have, can be used

Bore is in tolerence.

[AndyP]

If they're from a 2.2 you can't use them.

Edit : You MAY be able to use them but you'd have to machine the block to bring the compression back up.