Hello oh the knowledgable S2forum
My RS2 suddenly died on me a days ago. After all the usual checks, I narrowed it down to PIN27 not getting switched 12v. I made a temperary jumper cable from PIN18 (12v supply) and it fired right up. I've tried three different ECU's, all same result. I'm looking for the 12v source for PIN27, does any one know of some scematics? I was hoping it was just a sticky relay I didn't knew existed, but I am afraid I need a new ignition switch...
Here's the pinout:
http://www.s2central.com/motronic_pinout_ABY.html
My RS2 suddenly died on me a days ago. After all the usual checks, I narrowed it down to PIN27 not getting switched 12v. I made a temperary jumper cable from PIN18 (12v supply) and it fired right up. I've tried three different ECU's, all same result. I'm looking for the 12v source for PIN27, does any one know of some scematics? I was hoping it was just a sticky relay I didn't knew existed, but I am afraid I need a new ignition switch...
Here's the pinout:
http://www.s2central.com/motronic_pinout_ABY.html
Comment