Just bought an Audi 100 2.5 TDI C4 from 1994 but some injection pump problem

[Macchris]

Hi guys,

just bought this some days ago :

[Macchris]

I guess you understand why i buy this car Audi 100 2.5 TDI AAT with 5 speed gearbox, and lot of S6 stuff on it (S6 front wings, leather seats, HP2 brakes, S4 sedan rear taillight, carbon trim (with some marks on it :-(( ), new front wheels disc (in trunk), ....

The car doesent start, VAGcom said :

[QUOTE][/1 Code défaut trouvé
00550 - Régulation du début d´injection
17-10 - Différence de régulation - Intermittent
Tests passés: N/DQUOTE]

I have seen this for pump marks on a howto for AAT
post-142971-0-69085900-1495739960_thumb.jpgthen i put "0"
calagepi1.jpg

the marks seems to be not in the same than howto pic :

calagepi2.jpg
calagepi3.jpg

but i dunno where to put the wheel pump on which marks ?

calagepi6.jpg

I have just tried this but it doesent work, the car dont want to start

calagepi7.jpg


Thanks for your help guys :-)
See u
Tof

[Macchris]

It works ! i put the mark more high and the car start in 1/4 second but some smoke behind, i guess i must use VCDS

[John.]

Nice wagon ! Has someone fitted a new belt previously and not set it up right for it to not start?

[Macchris]

Thanks John, however this wagon is not so clean if you look closely, i have bought it for parts,

Strangely the belt seems to be very old so dont understand why the car did not start since august...