Head gasket

[madS2]

Replacing my head gasket as the last 1 went pop.with the head coming off is there anything you guys can recommend ie boring,gas flowing to get more power?

[lune]

I had my head & manifolds ported and polished whilst it was off. I also replaced my EM for an RS2 item as alot of the time the original is cracked and is sometimes a PITA to remove in situ, if you decided to change at a later date.
The result has been better performance when higher up the rev's
I suppose it all depends on how much the dark side calls to you
I would make sure you change valve stem oil seals and Hall sender (cam position sensor).
I dare say people will suggest all sorts and in the end it depends how many pennies your going to throw at it.

[volcano rs]

its a 3b he dosen't need to change the hall sender unless his dizzy is faulty

[s2_bo]

its a 3b he dosen't need to change the hall sender unless his dizzy is faulty

Might be worth replacing the Dizzy gear with a bronzeone
while there is access to it.