3b RS2 upgrade with stock injectors?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ws2
    S2Forum Fanatic
    • Nov 2006
    • 56
    • Country: Netherlands

    #1

    3b RS2 upgrade with stock injectors?

    On this site http://www.meckisfaq.de/viewtopic.php?t=33 (german)

    They say the rs2 upgrade can be done with stock 3b injectors and a 7A FPR (4,2bar)
    even the stock fuel pump is good enough.


    What do you guys think? :mischeif:
  • Jamo
    Retired OG Mod
    • Mar 2004
    • 21750
    • Country: United Kingdom

    #2
    Yeh it can be done but with limited power, search the forum for Mihnea power quotes think it was about 320 bhp with that setup.

    MartinJS ran a similar setup for a while.

    Comment

    • Jamo
      Retired OG Mod
      • Mar 2004
      • 21750
      • Country: United Kingdom

      #3
      I hope this is a babelfish error!

      Cylinder head gasket would be of ADU however the paper ZKD is better

      Comment

      • Ws2
        S2Forum Fanatic
        • Nov 2006
        • 56
        • Country: Netherlands

        #4
        It says that the ADU gasket is better, but the paper is good enough to 380hp on that AAN engine with 1.8bar overboost

        Comment

        • Jamo
          Retired OG Mod
          • Mar 2004
          • 21750
          • Country: United Kingdom

          #5
          Originally posted by Ws2
          It says that the ADU gasket is better, but the paper is good enough to 380hp on that AAN engine with 1.8bar overboost
          Utter tosh, the paper gasket will blow anywhere around 300 bhp, ask Audiman!

          Comment

          • merlin's S4
            S2Forum Extremist
            • Jan 2005
            • 1539
            • Country: United Kingdom

            #6
            My paper gasket leaked even with the standard power!!
            '93 S4 Avant now back on the road complete with new shiny go faster bits.

            Comment

            • Sir Buff
              S2Forum Enthusiast
              • May 2004
              • 127
              • Current: Switzerland

              #7
              IMHO the ABY injectors are good for at least 320 PS.
              The 3B injectors have the same throughput with 3 bar like the ABYs with 4 bar.
              236,6 g/min
              Last edited by Sir Buff; 2 February 2007, 18:49.
              http://www.audi90.ch

              Comment

              Working...