Having trouble removing dip-stick tube
what's the trick ?
what's the trick ?
-
-
What motor is it 3B or ABY/AAN? The 3B tube goes directly into the block and the later cars have an adapter which is in the block. Both can be removed with a suitable size drift from the bottom of the block.91 Modded 3B
14 A6 Avant Black Edition -
It is 7A block, also has an AAT, no one has adapter ...
Have tried hitting (pretty hard) from the bottom but no movement at all, just have to hit harder then ...Comment
-
I used a decent sized lump hammer and a drift which just fitted the hole in the block. You could soak the outside with penatrating oil too.91 Modded 3B
14 A6 Avant Black EditionComment
-
yea, suppose it's important with a proper matching drift ... the one I used was propably to small ...
I'll soak it with wd40 and find a better drift
Comment
Comment