Sparkplug wires and connectors

[S2_avant 19930325]

Does anyone know what the metallclips/connectors has for "number" , what to do my own cables for another car . i have msd wires and the rubber connection , need only the clips .

[LSG]

The metal clips ? Plug or coil end. How many do you want. Can you post a photo.

[S2_avant 19930325]

I need plug and coil end . at the coil end i need the clip for M4 thread and it should be bendable at coil end if you use like 9o degress to coil.
I need 15 each, total 30.
Best Regards

[LSG]

We use them on some off the turbo busa jobs but i dont think i,d have 30 spare. Why so many ???

[Bowie69]

You can get the connectors on ebay very easily:

https://www.ebay.co.uk/itm/10-each-s....m46890.l49286

(not necessarily the right ones, just an example)

[S2_avant 19930325]

I need plug and coil end . at the coil end i need the clip for M4 thread and it should be bendable at coil end if you use like 9o degress to coil.
I need 15 each, total 30.
Best Regards

I want to make new igniton cables , for 2 of my cars ,, 6 cylinder bmw.
But after checking i need 4 wires , that i have. And the clips in both ends for 8.5mm cable.
The rubber housing i will reuse.

[S2_avant 19930325]

You can get the connectors on ebay very easily:

https://www.ebay.co.uk/itm/10-each-s....m46890.l49286

(not necessarily the right ones, just an example)

But when you look for 8.5 mm connectors you dont get so many choices , pretty expensive.