car wont fire

[Gazmitchell]

my bloody car started 1st time few days back when sorting brakes out for advert went to move it now turns over wont fire couldn't hear pump so, checked fuse and relay swap , No . changed fuel pump for old standard , hear it now on turn over humming but still wont frigging fire, just perfect timing as now selling it ? last thing crank sensor ? was new few years back and done f all driving on it anything else anyone can think of ? is there another part no sensor from euro car parts did i read is the same part ? cheers Gary

[Tractor Dave]

Have you got a spark? Pull a plug and check. After that check you have petrol getting to injectors.
I do feel sorry for you. This is bad timing

[K Simmonds]

Can you pull the fault codes?

As Dave says above you could do some basic checks to narrow things down a little.

Cam position sensors have a habit of failing at the worst possible time, not saying it's that but it would be one of my first thoughts if you don't have a spark.

[Colesy]

There is a good guide to follow here:

https://www.s2forum.com/forum/technical/engine-and-turbo/63016-potential-solutions-to-why-your-aan-powered-urs-isn-t-starting

There aren't too many things that will stop a car firing so shouldn't take too long to run through.

[Gazmitchell]

Yeh I’ve had at least 3 cam sensors on it in the past ! I’ll do a code check and see but to have run two days prior then nowt seems just like cam sensor .. I’ll check spark / fuel .. ****ing headache these cars !! ?