Shorten throttle/accelerator cable (3b b2 swap)

[ZiMMeN]

Hi all.
Need to shorten my accelerator cabel so it fits the 3b intake manifold.
And what i know is that the ur-quattro with RR engine have the right length.

So my question is, do anyone know how long the RR accelerator cable is? Part Nr: 857721555A
Or how much i need to shorten it?

[pfi]

In ETKA 857721555A only shows up as for the RR
No clue about its length but is it a problem ?, better too long than too short ... ?

My "problem" is to find a throttle cable that's long enough to be used in a s2/3B with "reversed" intake mani ...

[Laaf]

pfi: 893721555R is the throttle cable you need, that one is specified on Wagner Tunings website. This is if you drive a B3 or B4 car.

For a B2 it's another story, 857 721 555 is listed for WR, GV, MB & WX 10v engines and KW sport quattro engine. I have a 857 721 555 at home to try and fit to my B2 with a Furans reversed manifold but I haven't gotten around to try it yet.

[ZiMMeN]

In ETKA 857721555A only shows up as for the RR
No clue about its length but is it a problem ?, better too long than too short ... ?

My "problem" is to find a throttle cable that's long enough to be used in a s2/3B with "reversed" intake mani ...

it is too long, so it needs to be shortened.
thought if someone knew the length of the RR cable they would be easier to shorten it right.

pfi: 893721555R is the throttle cable you need, that one is specified on Wagner Tunings website. This is if you drive a B3 or B4 car.

For a B2 it's another story, 857 721 555 is listed for WR, GV, MB & WX 10v engines and KW sport quattro engine. I have a 857 721 555 at home to try and fit to my B2 with a Furans reversed manifold but I haven't gotten around to try it yet.

the 10v cable won't work, the intake manifold is located at another place