Can anyone tell me what fitting I need here?

[Jaswan]

Hi all.

I have went to fit a pump into my tank and I am missing a banjo fitting.

A look online and I can find barb fittings but not an Audi specific one to attach the internal fuel line.

Can anyone help?

I'm hoping I can source one local.

Much appreciated ? ?

Jase

[K Simmonds]

I will have the part you need in my bag of Audi fuel pipe fitting's, I even think I know where that is, in my RS2 spare's cabinet in the house.

There should be a non return valve on top of the pump but I did away with that on my 3B to get the 044 pump in there without the assembly touching the top of the tank as that does make one hell of racket.

Didn't make a blind bit of difference to how the car started.

[Jaswan]

Hi Kit. Thanks!

And yeah there is a valve on there, it does look like it will be too tall to get the lid back on.

The non return isn't an issue as this pump is only feeding a surge tank with a walbro in there.

Cheers.

[K Simmonds]

No worries Jase...

I've just been through my RS2 parts cabinet and the black Audi tool kit bag with all my fuel system fitting's in isn't in there with another one which is full of N75's and other small senders.

I must have needed something out of it on a job, taken it down to the workshop and left it there as nothing in the bag is RS2 related, it's all the fitting's from the past three Coupe's I've broken and some other B3 odd's and sod's.

I need to get in there in morning to try and find a part for someone else and I've a pretty good idea where I will have put them, so please bare with me.

When I find it it's your's FOC.

[Jaswan]

Ah Kit, you are the best!!


I really appreciate it.

Jase.