Sport Quattro EM brace

[terrybullwon]

Guys i am trying to track down a SQ EM brace, i cant find a picture of one fitted either

Does any one know much about these?

Cheers James

[Jamo]

Rocking horse sh*t

034 will be producing one I do believe when the Wagner replica is complete.

How much confirmed this is I don't know as Javad mentioned it in passing.

[terrybullwon]

Rocking horse sh*t

034 will be producing one I do believe when the Wagner replica is complete.

How much confirmed this is I don't know as Javad mentioned it in passing.

Owell looks like i am going to have to make one

[Jamo]

As per this original post and my response, has anyone got a picture of the brace?

[mcandmar]

Not sure how original this car is, or if its even a works car but i can see some sort of brace under the collector.

[Jamo]

Anyone else? looks like the oen above isn't the same as the sq manifold

[SteveH]

Two threaded rods with an adjuster in the middle of each one would probably do the job.

[Ian Simmonds]

Anyone else? looks like the oen above isn't the same as the sq manifold

One of these?

[SteveH]

I thought he was referring to the support from the bottom of the manifold to the block

[Ian Simmonds]

I thought he was referring to the support from the bottom of the manifold to the block

It's probably me that's got the wrong end of the stick Steve... Sorry.
VBR
Ian

[Jamo]

Cheers Steve might make one from scratch as the engine mount holes dont line up with the manifold so many a bit of think to do it, sure to think of something

[SteveH]

I bet Aelred has details/pics of the brace. It must be threaded at the top and bottom to connect to the bottom of the manifold and the engine mount.

[Tonks4x4]

The Manifold is bolted to the engine foot from the engine...

Here is the best pic I can find...

[Jamo]

Bingo! cheers tonks but because of the stroker it is further away, will thread rod be strong enough?

[A80Avant]

I have a small metal brace. Not sure If Brian has a photo of it.

sent using Android