450-500hp injectors

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • eddiee
    S2Forum Hobbyist
    • Sep 2006
    • 17
    • Country: Denmark

    #1

    450-500hp injectors

    hey..what size of injectors will i need fore my s2 450-500hp project at 4bar. i heard 440cc will be god enough
    Last edited by eddiee; 22 August 2007, 19:20.
  • terrybullwon
    S2Forum Zealot
    • Mar 2006
    • 8782
    • Country: England

    #2
    IIRC rule of thumb cc = Bhp

    Chef

    Comment

    • audiman
      S2Forum Freak
      • Jul 2003
      • 4827
      • Country: United Kingdom

      #3
      Just get the 630cc as they are big enough and no dearer to buy than the small ones. Also will allow you to go higher and not change injectors.
      sigpic
      Tom C - www.rcmr.co.uk
      Audi UR Quattro
      Audi 100 C3 2.0 5 cyl 115ps
      Audi S2 - 07k engine project aiming for 800ps
      Audi B5 RS4 645ps 911nm

      Comment

      • lini
        S2Forum Enthusiast
        • May 2007
        • 159
        • Country: Slovenia

        #4
        How high will 750allow then?
        S2+AAN in progress (again), BMW 3 compact

        Comment

        • audiman
          S2Forum Freak
          • Jul 2003
          • 4827
          • Country: United Kingdom

          #5
          about 700bhp, but it all depends on pump pressure and pump flow rate.
          sigpic
          Tom C - www.rcmr.co.uk
          Audi UR Quattro
          Audi 100 C3 2.0 5 cyl 115ps
          Audi S2 - 07k engine project aiming for 800ps
          Audi B5 RS4 645ps 911nm

          Comment

          • Jamo
            Retired OG Mod
            • Mar 2004
            • 21750
            • Country: United Kingdom

            #6
            Aron has some 750cc for sale. If you can find them cheap porsche orange tops would be ideal for your application but as Audiman says 630 cc would allow for future expansion.
            I'm going with 750cc incase i upgrade to a gt35/40

            Comment

            • audiman
              S2Forum Freak
              • Jul 2003
              • 4827
              • Country: United Kingdom

              #7
              What for Jamo?? I used the 630cc in mine with 10 bar pump and 4bar reg. Still had headroom and that was pushing a good 600bhp
              sigpic
              Tom C - www.rcmr.co.uk
              Audi UR Quattro
              Audi 100 C3 2.0 5 cyl 115ps
              Audi S2 - 07k engine project aiming for 800ps
              Audi B5 RS4 645ps 911nm

              Comment

              • Jamo
                Retired OG Mod
                • Mar 2004
                • 21750
                • Country: United Kingdom

                #8
                Originally posted by audiman
                What for Jamo?? I used the 630cc in mine with 10 bar pump and 4bar reg. Still had headroom and that was pushing a good 600bhp
                2 reasons but mainly reason 1

                1) Because I bought them cheaper than I could get 630cc ones

                2) Aron is running the same engine setup and turbo I will have so it's a proven for my needs.

                Comment

                Working...