RS2 main bearings price??

**NoNonsense** · 5 September 2007, 18:41

I'd like to know, too!

**Mark Halligan** · 5 September 2007, 19:45

Originally posted by terrybullwon

Any body i am in kind of a rush on this and need to know before Am

Cheers James

James

Can't remember how much they were, but if you do get some from Audi take each journal set out of their boxes and check them before you accept and pay for them. I have found that they sometimes come with digs and nicks out of the bearing material almost as if they were all just dropped together into a bucket before they were boxed up.

Took me a few goes to get a perfect set for my last build.

**terrybullwon** · 5 September 2007, 20:13

Originally posted by Mark Halligan

James

Can't remember how much they were, but if you do get some from Audi take each journal set out of their boxes and check them before you accept and pay for them. I have found that they sometimes come with digs and nicks out of the bearing material almost as if they were all just dropped together into a bucket before they were boxed up.

Took me a few goes to get a perfect set for my last build.

Thanks Mark, i find that quite unbelivable

Audi parts are always spot on.

**urquattro-island** · 5 September 2007, 20:23

think

guy with shop on ebay takes 99euro for a set..

**AndyP** · 5 September 2007, 21:21

The main bearings for the RS2 and the S2 are the same, 034 198 491C. I got mine from 034 and paid $229.50 for the mains and $138 for the big ends. The mains were genuine Audi, but as Mark said one did have a very small nick in it. I've since manged to source Glyco mains locally for £68, they are the same as the Audi ones.

Andy

**newbie77** · 8 May 2009, 11:38

Hey Andy,

where did you manage to find the glyco bearings for £68????

Cheers,
Jon

**AndyP** · 8 May 2009, 11:49

Local engine refurb shop, why how much are they now?

**newbie77** · 8 May 2009, 15:19

no, sorry, I don't know, was trying to locate some for a reasonable price (which yours were) so was hoping to get them from the same place :-)

**terrybullwon** · 8 May 2009, 16:22

Use the Glyco ones, Aelred off this forum has them to hand i "think"

Regards james

**s2_bo** · 8 May 2009, 16:26

There is also a guy on ebay de selling glyco ones.

**Flat on my back** · 8 May 2009, 16:30

.

Main bearings, Glyco. H981/6 STD
Thrust bearings, Glyco. A124/4 STD
Big end bearings, Glyco. 71-3694/5 STD

Hth.

RS2 main bearings price??

RS2 main bearings price??

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment