-
UrS6 - Homefry, Bailey DV, PiperX filter, Samco hoses, H&R springs, 3" D/P back zorst, 270bhp and 260ftlb :rock:
Triumph Daytona 955i - mmmmmm :fire:
80 dag dag :driving:
-
looks like that chinese imitation of an RS2 manifold,probably melt if you fart in its general direction. -
the price of them xs power manifolds is different every time they apear on the bay. i bought one a wile back ( regret it now
) for £262 havent put it on not sure if it ever will as the casting quality is a bit rubbish as the ports aren't full size. doesn't look like the pic they have up. could be cleaned out with a die grinder but don't really trust the metal quality. the last time i saw them the starting price was 60 something pounds i think
never set your expectations to high that way you are never disapointedComment
-
Have you got any better pictures of it than whats in the auction listing as those pictures have too much glare etc on them.the price of them xs power manifolds is different every time they apear on the bay. i bought one a wile back ( regret it now ) for £262 havent put it on not sure if it ever will as the casting quality is a bit rubbish as the ports aren't full size. doesn't look like the pic they have up. could be cleaned out with a die grinder but don't really trust the metal quality. the last time i saw them the starting price was 60 something pounds i thinkComment
-
Who in their right minds would spend 300 quid on a tap that wont work!!!??Comment
-
Anybody had problems with this manifold ?
i just have it on my car the holes drilled in it are not a perfect fit
the material
is not that good quality
the total looks of it are terrible 
.
but it works for now ..hope it wont melt
for shure next time i better buy an original .RS for ‘Rennsport’ - ‘Motorsport’ in GermanComment
-
We had one NDT inspected and it passed. The casting isn't the prettiest, but it is solid. Not had the material tested so can't say if it will melt. I doubt it though.Kingdoms are run by Kings, Dictatorships are run by Dictators.
England must be a Country. :mischeif:Comment
-
Shocking misalignment on the wastegate flange lobes.
Other than that, I can't comment!Martin Cutting
aka Keeper of "The Teutonic Kitten"
It's not better than sex, but it runs it a close second.Comment
-
there was a general rule to no buy anthing xspower/chinese crap a while back. turbos falling to bits after a few weeks. cheap stuff but thats it cheap.
if you want a log make your own. a flange set and a tube is all thats needed.
paid less than that for my tubular on ebay. seems ok so far.Comment
-
NDT inspected. whats that then. sorry no picsnever set your expectations to high that way you are never disapointedComment
-
NDT = Non destructive tested immsmc91 Modded 3B
14 A6 Avant Black EditionComment
-
well when my car comes back from the paintshop
i give it a test at high speed on The german Autobahn a few hunderd kilometers from Amsterdam
i try it there hope it wont crack or melt
better get one oem manifold for a good price
RS for ‘Rennsport’ - ‘Motorsport’ in GermanComment
Comment